KORELASI SERAPAN AIR DAN POROSITAS MORTAR BERKELANJUTAN BERBASIS SERBUK GERGAJI, ABU SEKAM PADI, DAN SLAG NIKEL
DOI:
https://doi.org/10.17977/um071v31i22026p145-154Keywords:
Sawdust, Rice Husk Ash, Nickel Slag, Water Absorption, PorosityAbstract
This study aimed to analyze the effect of varying proportions of sawdust, rice husk ash (RHA), and nickel slag on the water absorption and porosity of mortar and to examine the relationship between these two parameters. An experimental laboratory study was conducted using six mixture variations consisting of one control mixture and five modified mixtures. RHA was used at 5% as a partial cement replacement, while sawdust and nickel slag were used as partial sand replacements at different proportions. Cube specimens measuring 50 × 50 × 50 mm were prepared, with three specimens for each mixture, and tested at 28 days. Water absorption and porosity were determined using a gravimetric method, while their relationship was analyzed using linear regression. The results showed that mixtures containing up to 10% sawdust exhibited water absorption and porosity values comparable to or lower than those of the control mixture, whereas mixtures containing 15% sawdust showed more pronounced increases in both parameters. Linear regression produced the equation y=0.618x−2.494 with nilai R2=0.993, indicating a very strong positive relationship between porosity and water absorption. These findings highlight the importance of balancing waste-material proportions to control the physical characteristics of sustainable mortar.
References
ASTM International. (2021). ASTM C642-21: Standard test method for density, absorption, and voids in hardened concrete. ASTM International.
Cheng, Y., Liu, J., Wang, W., Jin, L., & Yan, S. (2024). Preparation and property study of sawdust-modified cement mortar. Frontiers in Materials, 11, 1457167. https://doi.org/10.3389/fmats.2024.1457167
Cho, W. J., Kim, M. J., & Kim, J. S. (2020). Study on the pore structure characteristics of ferronickel-slag-mixed ternary-blended cement. Materials, 13(21), 4863. https://doi.org/10.3390/ma13214863
Corinaldesi, V., Mazzoli, A., & Siddique, R. (2016). Characterization of lightweight mortars containing wood processing by-products waste. Construction and Building Materials, 123, 281–289. https://doi.org/10.1016/j.conbuildmat.2016.07.011
de Silva, G. H. M. J. S., Vishvalingam, S., & Etampawala, T. (2021). Effect of waste rice husk ash from rice husk fuelled brick kilns on strength, durability and thermal performances of mortar. Construction and Building Materials, 268, 121794. https://doi.org/10.1016/j.conbuildmat.2020.121794
Edwin, R. S., Kimsan, M., Tamburaka, I. P., Pramono, B., Azis, A., Van den Heede, P., De Belie, N., & Gruyaert, E. (2022). Effect of ferronickel slag as cementitious material on strength of mortar. Key Engineering Materials, 931, 213–218. https://doi.org/10.4028/p-n4v7se
Guan, Q., Xia, J., Leng, F., & Zhou, Y. (2021). Utilizing blast furnace ferronickel slag as paste replacement to reduce white Portland cement content and improve performance of mortar. Advances in Bridge Engineering, 2, 18. https://doi.org/10.1186/s43251-021-00039-6
Jamil, M., Khan, M. N. N., Karim, M. R., Kaish, A. B. M. A., & Zain, M. F. M. (2016). Physical and chemical contributions of rice husk ash on the properties of mortar. Construction and Building Materials, 128, 185–198. https://doi.org/10.1016/j.conbuildmat.2016.10.029
Khan, M. N. N., Jamil, M., Karim, M. R., Zain, M. F. M., & Kaish, A. B. M. A. (2017). Filler effect of pozzolanic materials on the strength and microstructure development of mortar. KSCE Journal of Civil Engineering, 21(1), 274–284. https://doi.org/10.1007/s12205-016-0737-5
Koçkal, N. U., & Çamurlu, E. (2022). Engineering properties of lightweight mortars containing wood waste particles. Gazi University Journal of Science Part A: Engineering and Innovation, 9(4), 490–499. https://doi.org/10.54287/gujsa.1193927
Kuri, J. C., Khan, M. N. N., & Sarker, P. K. (2022). Workability, strength and microstructural properties of ground ferronickel slag blended fly ash geopolymer mortar. Journal of Sustainable Cement-Based Materials, 11(2), 107–124. https://doi.org/10.1080/21650373.2020.1823905
Lu, L., Yang, Z., Lin, Y., & Dong, S. (2023). Partial replacement of manufactured sand with homologous granite powder in mortar: The effect on porosity and capillary water absorption. Construction and Building Materials, 376, 131031. https://doi.org/10.1016/j.conbuildmat.2023.131031
Noaman, M. A., Karim, M. R., Islam, M. N., & Mia, M. S. (2022). Strength and durability parameters of brick aggregate concrete incorporating rice husk ash as a partial replacement of cement. Advances in Materials Science and Engineering, 2022, 8541276. https://doi.org/10.1155/2022/8541276
Ren, F., Zhou, C., Zeng, Q., Zhang, Z., Angst, U., & Wang, W. (2021). Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water. Cement and Concrete Research, 143, 106395. https://doi.org/10.1016/j.cemconres.2021.106395
Tebbal, N., Maza, M., & Rahmouni, Z. E. A. (2022). Use of a full factorial design to study the relationship between water absorption and porosity of GP and BW mortar activated. Advances in Civil Engineering, 2022, 2016157. https://doi.org/10.1155/2022/2016157
Thiedeitz, M., Ostermaier, B., & Kränkel, T. (2022). Rice husk ash as an additive in mortar—Contribution to microstructural, strength and durability performance. Resources, Conservation and Recycling, 184, 106389. https://doi.org/10.1016/j.resconrec.2022.106389
Trykoz, L., Rezunenko, M., Pustovoitova, O., Semenova-Kulish, V., & Borodin, D. (2022). Water absorption kinetics of bitumen modified cement mortars. Roads and Bridges–Drogi i Mosty, 21(2), 167–178. https://doi.org/10.7409/rabdim.022.010
Vishavkarma, A., & Harish, K. V. (2022). Effect of rice husk ash on permeation characteristic of cementitious mortar. Materials Today: Proceedings, 61, 406–412. https://doi.org/10.1016/j.matpr.2021.10.448
Wygocka-Domagałło, A., & Garbalińska, H. (2020). The effect of pore structure on the water sorption coefficient of cement mortars reinforced with 12 mm polypropylene fibres. Construction and Building Materials, 248, 118606. https://doi.org/10.1016/j.conbuildmat.2020.118606
You, N., Li, B., Cao, R., Shi, J., Chen, C., & Zhang, Y. (2019). The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar. Construction and Building Materials, 227, 116614. https://doi.org/10.1016/j.conbuildmat.2019.07.340
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Irma Aswani Ahmad, Armiwati, Harmita Lestari, Hilton Ahmad

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.





