THE BEHAVIOR OF SELF COMPACTING CONCRETE BEAMS REINFORCED STEEL ROUND HOLLOW PIPE IN Fc' 25 MPa CONCRETE
DOI:
https://doi.org/10.17977/10.17977/um071v27i1.12022p107-121Keywords:
beam behavior, self-compacting concrete beams, round hollow pipe, steel reinforcement, concrete fc' 25 MPaAbstract
This research examines the behavior of Self Compacting Concrete beams reinforced with
round hollow steel pipes on fc' 25 MPa concrete which aims to determine the effect of both types of
reinforcement characteristics on flexural capacity, deflection, and crack patterns in self-compacting
concrete beams reinforced with round hollow steel pipes size 1.8 x 16 x 1000 mm and plain steel
reinforcement ∅10 which is used as longitudinal reinforcement. The specimen of a reinforced concrete
beam with a dimension was 12 cm x 18 cm x 100 cm used 2 types of longitudinal reinforcement. BTH
beams use longitudinal reinforcement from round hollow pipe steel reinforcement measuring 1.8 x 16
x 1000 mm and BTK beams use longitudinal reinforcement from steel reinforcement plain ∅10 while
the stirrup reinforcement used steel reinforcement ∅6. Based on the research results, the average
flexural capacity of BTK beams is 16.50 MPa and the average flexural capacity of BTH beams is
16.41 MPa. The test results of the maximum deflection of the BTK beam are 9.83 mm and the average
maximum deflection of the BTH beam is 7.84 mm. The flexural capacity between the two types of
beams does not have a significant difference. The maximum deflection that occurs from the BTK
beam and the BTH beam does not have a significant difference. The crack pattern of all beam
specimens is categorized as a flexural crack.
References
Alfredo, Marchin. 2012. Study of Compressive Strength of Medium Quality Normal Concrete with a Mixture of Rice Husk Ash (RHA) and Mixed Concrete Waste (CSW). [Thesis]. Depok: University of Indonesia.
Aritonang, Rimson. 2019. Designing an Environmentally Friendly Transportation Tool that Can Be Operated with Two Variations (Manual and Automatic) Using a Polygon Bicycle Frame with an Electric Current Power Source from an "Electric Bicycle" Battery. [Thesis]. Medan: HKBP Nommensen University.
As'ad, Sholihin. 2017. Self Compacting Concrete, (Online), (http://cipil.ft.uns.ac.id/web/?p=855), accessed 17 February 2021.
Asroni, Ali. 2010. Reinforced Concrete Beams and Plates. Yogyakarta: Science Graha. National Standards Agency. 1990. SNI-03-1974:1990. Concrete Compressive Strength Test Method. Jakarta.
National Standards Agency. 1990. SK. SNI-T-15:1990-03. Procedure for Making Normal Concrete Mixture Plan. Bandung.
National Standards Agency. 1991. SNI-07-2529:1991. Concrete Steel Tensile Strength Test Method. Jakarta.
National Standards Agency. 2000. SNI-03-2834:2000. Procedure for Making a Normal Concrete Mix Plan. Jakarta.
National Standards Agency. 2002. SNI-03-2847:2002. Procedures for Calculation of Concrete Structures for Buildings (Beta Version). Bandung.
National Standards Agency. 2004. SNI-15-2049:2004. Portland cement. Jakarta. National Standards Agency. 2004. SNI-15-7064: 2004. Composite Portland Cement. Jakarta.
National Standards Agency. 2011. SNI-2493:2011. Procedures for Making and Maintaining Concrete Test Objects in the Laboratory. Jakarta.
National Standards Agency. 2011. SNI-4431:2011. Method of Normal Concrete Flexural Strength Test with Two Loading Points. Jakarta.
National Standards Agency. 2013. SNI-2847:2013. Structural Concrete Requirements for Buildings. Jakarta.
National Standards Agency. 2013. SNI-7974:2013. Specifications for Mixing Water Used in the Production of Hydraulic Cement Concrete (ASTM C 1602-06, IDT). Jakarta.
National Standards Agency. 2015. SNI-1729:2015. Specifications for Structural Steel Buildings. Jakarta.
National Standards Agency. 2017. SNI-2052:2017. Concrete Reinforcing Steel. Jakarta.
National Standards Agency. 2019. SNI-2847:2019. Structural Concrete Requirements for Buildings and Description (ACI 318M-14 and ACI 318 RM-14, MOD). Jakarta.
Chandra, Reni W.M. 2016. Flexure Test of Bamboo Reinforced Beams with Variations a/d. Unpublished thesis. Malang: State University of Malang.
Dehn, F., Holschemer, K. and Weibe, D. 2000. Self Compacting Concrete (SCC) Time Development of the Material Properties and the Board Behavior. Lacer no. 5. Leipzig.
Dipohusodo, Istimawan. 1999. Reinforced Concrete Structures. Jakarta: PT. Scholastic Library.
Fredi L. Nge. 2016. Concrete Structural Components With External Reinforcement. Journal of Civil Engineering, Vol. V, No. 1.
Hastono, K. Budi. 2013. The use of mild steel (cold-formed) hollow type as reinforcement in reinforced concrete beams carrying bending loads. Journal of Civil Engineering, May Vol. 3, No. 1.
Manuworo, Niken. 2019. Study of Shear Strength Behavior of 25 MPa Quality Blocks with Gap Gradation. Unpublished thesis. Malang: State University of Malang.
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.





